HD Hydraulic Bottle Car Jack – [3-5-8T]

HD Hydraulic Bottle Car Jack – [3-5-8T]

SKU: 3-5-8T-NO-KERNEL

This is the general “HD Hydraulic Bottle Car Jack – [3-5-8T]” SKU, each type has a different product code as follows:

Available Types:

1. 3 Ton (SKU: 3Ton)

2. 5 Ton (SKU: 5Ton)

3. 8 Ton (SKU: 8Ton)

Product Specs:

3 Ton Hydraulic Bottle Jack

• Suitable for vertical lifting
• Lifting capacity up to 3 tons
• Height without lifting: 15 cm
• Maximum height: 29 cm
• For loads up to 3 tons

5 Ton Hydraulic Bottle Jack

• Suitable for vertical lifting
• Lifting capacity up to 5 tons
• Height without lifting: 18 cm
• Maximum height: 35 cm
• For loads up to 5 tons

8 Ton Hydraulic Bottle Jack

• Suitable for vertical lifting
• Lifting capacity up to 8 tons
• Height without lifting: 22 cm
• Maximum height: 38 cm
• For loads up to 8 tons

Note:

• Before use of the hydraulic bottle lift, calculate the weight of the load.
• Do not overload the hydraulic jack beyond its rated capacity.
• Select the lifting point according to the center of gravity; place the jack on the ground if necessary.
• Place a hard board under the jack to avoid deformation or tipping during operation.
• Insert the handle into the socket, and the piston will lift steadily with the up and down movement of the handle, raising the load.
• The jack will stop rising when the required height is reached.
• When the jack is in the desired position, turn the pressure valve clockwise to secure the shaft.
• When finished using the jack, turn the pressure valve counterclockwise.
• If using the jack on soft ground, we recommend placing a large baseplate or a hard object underneath it.

Video