Metal Cold Welding Adhesive [MA PROFESSIONAL]
Product Code:20A40
- Type: Cold glue 2 Materials
- Size: 56 gr
- Suitable for gaps up to 5mm
- Extremely Powerful Mixing time 4-6 minutes
- It dries in 10 minutes
- Suitable for any type of metal such as steel, cast iron, copper, bronze, stainless steel, aluminum, pencil, etc.
- Sticks hard plastics together (except polyorefin and Teflon) as well as ceramics, cement, wood and in heterogeneous combination with each other
- After 16 hours, it withstands shear pressures of 3,000 psi
- It is not affected by chemicals
- Resistant to most industrial liquids, acids, brake fluids, antifreeze fuels, lubricants, etc.
- Withstands hot environments
- Set Safety Limit From + 155C to + 160C (Tested at Resistance to + 220C with Excellent Results)
Instructions for use
- Surfaces Must Be Dry And Clean (For Even Better Results It Is Recommended To Use Sandpaper)
- After Massaging the Tubes Put Quantities of Equal Length And Mix Well
- Spread the Gray Mixture on the Surface and Remove the Extra Amount Immediately
- Allow 16 Hours Before The Item Operates
| Weight | 0,1 kg |
|---|---|
| Manufacturer |
