Jeep Wrangler JL 2018+ Programmer Module Tazer Mini [Z Automotive]

Jeep Wrangler JL 2018+ Programmer Module Tazer Mini [Z Automotive]

SKU: ZATJLMINI

Specs:

• Jeep Wrangler JL Programmer Module
• Simple, plug-in installation
• Color: Black
• High quality materials
• Navigate the menus using steering wheel buttons
• Vehicle settings accessed with the engine off – changes will work even if the programmer is disconnected
• Live functions accessed with the engine on – changes are made live in real time and only work if the programmer is connected
• “Non-Menu” live functions – activated automatically or with a steering wheel button combination

Vehicle Settings (engine off):

• Light Show – 6 preset and 3 custom light shows that flash all the exterior lights
• Perfect for car shows/first responders/off-road visibility
• Controlled from key fob or steering wheel buttons
• Can be enabled in-motion for use in parades or off-road
• Change tire size
• Change gear ratio (max 4.50 on 4XE)
• Change transfer case LOW ratio
• Enable/disable TPMS warnings (Tire Pressure Monitoring System)
• Set TPMS pressure warning limit, front and rear, between 25psi/1.7bar and 85psi/5.8bar
• Enable/disable backup camera
• Enable/disable Cargo Camera input (8.4 UConnect only)
• Enable/disable TravelLink/XM Traffic and weather
• Activate Offroad Pages (after upgrade to 8.4″ radio)
• Change Daytime Running Lights (DRL) location
• Enable/disable DRL Dropout (DRL turn off while using blinker)
• Enable/disable factory fog lights
• Enable/disable Fog Light Dropout (when fogs shut off while using high beams)
• Enable/disable one-touch lane change
• Enable/disable factory halo lights
• Change headlight type (Std/LED)
• Change fog light type (Std/LED)
• Change tail light type (Std/LED)/delete sensor circuit for aftermarket lights
• Change front turn signal (std/LED)/delete sensor circuit for aftermarket lights
• Enable/disable factory auto hi-beam
• Enable/disable Trailer Tow setting
• Disable electronic sway bar (if removed from the vehicle)
• Disable electronic steering pump (after hydraulic steering conversions)
• Enable the trailer brake controller
• Disable front and rear lockers for axle swaps
• Disable front axle disconnect module for axle swaps
• Declare the presence of a Drivetrain Control Module (Rubicon Transfer Case)
• Enable/disable Aux Buttons
• Enable/disable Blind Spot Detection
• Delete the seat belt reminder chime
• Enable/disable/change ParkSense configuration
• Change cluster splash screen
• Enable HVAC dual-zone switch assembly when upgrading from 5″ radio
• Enable HomeLink (if HomeLink visor and harness are installed)
• Enable/disable auto dimming mirror (if installed)
• Enable Proximity Entry (if handles and harnesses are installed)
• Enable/disable auto headlights after sensors are installed
• Enable/disable PANIC button on remote
• “Unmarry” function returns to stock

Live Functions (engine on):

• Activate Light Show
• Hold brakes at red light (excluding 4XE)Use Garage Door Opener after shutdown
• Enable navigation entry in-motion
• TurnCAM – activate backup camera while using turn signals (5″, 7″ and 8.4″ UConnect)
• Kill3Honk – deactivate three honks after leaving running vehicle
• Toggle hood alarm
• Enable passenger side heat on remote start
• Flash third brake light when braking
• Customize third brake light flash pattern
• Define Winch Mode RPM between 1250 and 2000 RPM (excl. 4XE)
• Flash lights to indicate tire pressure while filling
• Dark Mode – turn off all exterior and interior lighting while parked with the engine running
• Activate and cycle through camera inputs
• Display Vacuum/Boost Gauge
• Activate 0-30 timer and 0-60 timer
• Force RWD (392 only)
• Display firmware version

“Non-Menu” Live Functions:

• AutoStopStart disable – Tazer JL Mini will remember your last settings
• AutoTracKill – Tazer JL Mini will remember your last TC settings
• Disconnect sway bar in 2WD up to 30mph or at any speed if mapped to a button
• License Plate Blanking – automatically turn off license plate light when in reverse or using TurnCam to reduce glare
• Light Show (shortcut)
• Open windows using key fob (experimental, may not work with all bypass types)
• Line Lock – lock front brakes for easy burnout
• Disable ESP/TC by holding ESP button
• Cycle camera outputs (shortcut)
• Cooldown Mode – turn on engine fans, even when engine is off
• Winch Mode – raise idle RPM to selected value
• Partial Reboot

The package “Jeep Wrangler JL Programmer Module” includes:

• x1 Programmer Module
• User Guide

Important notes:

• Designed specifically for Jeep Wrangler JL 2018+
• Installation by professionals is highly suggested
• One module can be used with one car only, afterward it can’t be used on any other vehicle
• For any questions or clarifications regarding the package contents, specs, price, shipment and more, feel free to contact us at any time (See the contact page for more)

Note from the manufacturer:

The Tazer Mini Programmer from Z Automotive is an essential tool for all Jeep Wrangler JL owners. This small device offers a lot of features, intuitive navigation, provides full control over basic and additional vehicle features, so you can fully personalize your Jeep’s equipment and performance.