Toyota Hilux 2005+ Upper Control Arms (Old Man Emu)
795,00 €
When an IFS vehicle is fitted with a suspension lift, the caster and camber can be pushed outside the factory specifications. IFS vehicles generally have a few degrees of adjustment in their camber and caster from the factory. Adding an Old Man Emu upper control arm brings the alignment cams back into an acceptable range for both caster and camber.
Toyota Hilux 2005+ Upper Control Arms (Old Man Emu)
SKU: UCA0003
- Forged Ball Joint Housing
- Forged Eyelets
- Heavy Duty greasable Ball Joint
- OME Ball joint protective cap
- GIIRO bushings, free pivoting, grease free and maintenance free
- Increased camber and caster for 2in lift
- Mount provision for OE ABS wires
- ARB’s Intergrit powder coat finish
- Boxed in pairs with foam inserts
- Fitting instructions included
- OME Branded outer sleeve
- Tested and passed to meet VSB14 requirements
- Package includes: 2 Upper control arms, Manual
! After fitment of Old Man Emu Upper Control Arms, a wheel alignment is required !
!! The OME Upper Control Arm will provide an increase between +2.5 and +3.5 degrees of caster and up to 1.5 degrees of negative camber increase (figures based off an approximate 50mm or 2in lift) !!
Follow us on: @xpower
If you have any questions, contact us at: contact
| Weight | 6 kg |
|---|---|
| Dimensions | 40 × 40 × 20 cm |
| Generation / Year | HILUX (REVO) 2015-2018, HILUX (ROCCO) 2018-2020, HILUX (VIGO) 2005-2015, HILUX (CRUISER, INVINCIBLE) 2020+ |
| Make | |
| Model |
